Olivia Cabinet - Arrow Sewing Cabinets
Sale!
 

Olivia Cabinet

$649.00$848.00

4.00 out of 5 based on 1 customer rating
(1 customer review)

The Olivia sewing cabinet’s dual-positioning mechanism, adjustable platform and plethora of storage cubbies and drawers, ensure that you’ll never have to work in a cramped space again. Capable of supporting a 45-pound machine, Olivia is both solid and charming. Of course, with a tri-color design option in Blue, Pistachio Green or Crisp White, it’s safe to say, quaint never looked so good!

Need even more space? Spread out with the optional quilt leaf extension and make the most of your workstation!

Find out more about the Olivia Cabinet below!

Clear
FacebookTwitterPinterest

Description

FEATURES

  • Vintage gingerbread design
  • The adjustable platform accommodates free arm and flatbed positions
  • The two-position mechanism will support a 45-pound machine 
  • Optional quilt leaf for additional workspace
  • Three color options available: Tiffany Blue #1009, Pistachio Green # 1004, or Crisp White #1001
  • Two drawers, and two deep cubbies for storage of your sewing machine, serger or baskets of fabric

Additional information

Olivia Variations

Tiffany Blue with No Quilt Leaf, Tiffany Blue with Blue Quilt Leaf, Pistachio Green with Green Quilt Leaf, Pistachio Green with No Quilt Leaf, White with White Quilt Leaf, White with No Quilt Leaf

Cabinet Specs / Incompatible Machines

CABINET SPECIFICATIONS

  • Cabinet Dimensions:
    • 64″ W x 19 ¾″ D x 30″ H
  • Maximum Machine Dimensions:
    • Width: 23 ½ ”  (left to right)
    • Depth: 12 ½” (front to back)
    • Height: Adjustable

SEWING MACHINES THAT DO NOT FIT OLIVIA

We are aware of the following sewing machines that are too large to fit into the Olivia Cabinet:

  • Baby Lock – Destiny, Solaris
  • Brother – Dream VX8500D, Suminaire Innov-is XP1
  • Janome – Horizon Memory Craft 15,000
    • The machine will fit the platform however, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
  • Elna – eXpressive 920
    • The machine will fit the platform however, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.

Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

Shipping Info

SHIPPING INFORMATION

  • The cabinet ships in 2 boxes by FedEx or UPS
  • Boxes weigh approximately 107 pounds
  • The optional quilt leaf ships in a separate box, weighing 22 pounds
  • Cannot be shipped to PO Boxes
  • If ordered, a Custom Machine Insert will be shipped separately and delivered three-four weeks later
  • Olivia is available fully assembled at Arrow Dealers 

Assembly Manuals / Videos

ASSEMBLY INSTRUCTIONS

Assembly instructions are included with the cabinet. You may also download the Olivia Assembly Manual and save it to your computer. We also have the following manuals as well: 

For assembly, you will need:

  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer or mallet
  • Optional:
    • WD-40
    • Adjustable wrench

Assembly Videos

1 review for Olivia Cabinet

  1. 4 out of 5

    Purchased the Olivia cabinet, in white, from Country Stitches in East Lansing. I was wonderfully surprised when I discovered it shipped in 3 boxes to the store where I picked it up. The side units were assembled, the drawers were assembled, and all I had to do once I got the boxes home, was to open them carefully and remove the components. The pegs and bolts were in place – no little parts.
    It took me quite a few tries shortening the chain to get the right height for my Janome Horizon 9400, but it fits great – plenty of room around the machine for plugs, etc.
    The drawback I found is that to put a small table to the left, to support a quilt for free-motion quilting, I have to block the left-hand drawer. There is an add-on support for the back of the cabinet, but nothing to front / left. The top surface is table height, rather than desk height. some folks might find it a little high.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…